Friday, November 15, 2019

The Seismic Exploration Survey Information Technology Essay

The Seismic Exploration Survey Information Technology Essay Seismic surveys aims at measuring the earths geological properties employing various physics principles of electric, gravitational, thermal and elastic theories. It was first employed successfully in Texas and Mexico by a company named Seismos in 1924. Since then, many oil companies have used the services of seismology to forecast the presence of hydrocarbon. Major oil companies have actively researched in the seismic technology and this has also found applications in various other researches by scientists around the world. Seismic exploration surveys are method employed in exploration geophysics that uses principles of reflection seismology to estimate the subsurface properties. The method requires a controlled source of energy that can generate seismic waves and highly sensitive receivers that can sense the reflected seismic waves. The time delay in sending and receiving signals can optimally be used to calculate the depth of the formation. Since different formation layers have different densities, they reflect back seismic waves at different velocities. This aspect can be used to estimate the depth of the target formation, usually shale or other rock formations that can form a cap rock or contain oil. Seismic surveys form a part of the preliminary exploration surveys and form the basis for further study of the area under consideration. Seismic waves are a form of elastic waves. When these waves travel through the medium, it creates impedance. The impedance generated between two layers will be different due to density contrast and thus at boundaries, some waves are reflected while other travel through the formation. For this reason, seismic exploration surveys require optimum energy waves which can penetrate through kilometers deep inside the earth to gather data. Hundreds of channels of data are recorded using multiple transmitters and reflectors spread over thousands of meters. Each seismic survey uses a specific type of wave and its arrival pattern in multichannel record. Seismic waves are categorized as : Body waves P-waves S-waves Surface waves Rayleigh wave Love wave For seismic survey, S-wave or the shear wave is the main concern. Seismic waves can be generated by Vibroseis. It employs the use of heavy damping of weight on the surface that generate seismic waves in the subsurface. Alternatively explosives can also be used that can be dug inside the surface to a few meters. The explosion can generate seismic waves. In marine acquisition, streamers are used to gather data. Coil shooting is employed by streamers to gather data. Seismic acquisition has evolved over time and with better technologies in place, the reliability of seismic surveys has been increasing. The 4-D seismic technology being the newest addition to the seismic technology is based upon time varying solutions to the data gathered. The better the acquisition, better are the correspondence analysis. The various seismic acquisition techniques apply to where the survey is being carried out. Surveys have effectively been carried out on land, seas or transition zones. The various techniques applied are : 2-D Seismic Survey they employ the use of seismic maps based on time and depth. Various group of seismic lines are acquired at significant gaps between adjacent lines. 3-D Seismic Survey a cubical arrangement of different slices that is arranged using computer algorithms and can be viewed on software. For a 3-D survey, different surveys are carried out at closely spaced line locations over the area which can be combined to form a cube. 4-D Seismic Survey a relatively new technology, which is an alteration to the 3-D survey. It takes into account the changes happening in the subsurface strata over the production years. Thus it takes into account time as the fourth dimension. This can be very beneficial while determining the well locations in field development. Processing of seismic data is the most important aspect since it undermines the potential of the interpretation process. Processing has mainly been done through various analysis that are majorly mathematical functions fed into computers. A major part of processing is done simultaneously along with acquisition. The data collected can be demultiplexed, convoluted or deconvoluted. This has been dealt with further in the project. Seismic data processing uses the concepts of geometrical analysis and powerful techniques of fourier analysis. The digital filtering theory and practical applications of digital techniques to enhance the images of subsurface geology can virtually be applied to any information sampled in time. The basis aspects of processing is to recognize and remove noise from the signal, correct the Normal Move Out (NMO), and stacking of data to form a chart of seismic image that can be used for further study. Interpretation follows exploration and processing of data. The structural interpretation of seismic images determines all decisions in hydrocarbon exploration and production. Since drilling a well for exploration proves costly, maximum information is derived from the seismic data to establish an opinion about the probability of finding petroleum in the structures. However, drilling is required to verify whether the structures are petroleum rich or not. Thus the main challenge is to establish a model which includes geologically reasonable solutions. Computer-aided seismic interpretation has been of much interest in the later years. The use of unique and highly complicated software has been recommended by various petroleum organizations, which can serve high reliability. However, automating the whole seismic process is an impossible job due to high heterogeneity and varying contrasts between data sources in different parts of the world. Horizon tracking and autopicking is gaining interest among various researchers and developers. This has successfully not been sought as yet. This project is aimed to study the various problems faced in horizon tracking while trying to execute an automated seismic interpretation process. Horizon tracking is basically carried out through autotrackers which are either feature based or correlation based. Feature based looks for similar configuration while the correlation method is more robust and less sensitive to noise. However, tracking across discontinuities is a difficult job. Thus the project is aimed at finding a way to track horizon across fault lines. CHAPTER 2 LITERATURE REVIEW SEISMIC EXPLORATION SURVEY Seismic exploration surveys in the field of oil and gas are an application of reflection seismology. It is a method to estimate the properties of the earths surface from reflected seismic waves. When a seismic wave travels through the rock surface it creates impedance. A wave travels through materials under the influence of pressure. Because molecules of the rock material is bound elastically to one another, the excess pressure results in a wave propagating through the solid. A seismic survey can reveal pockets of lower density material and their location. Although this cannot be guaranteed that oil can be found in these pockets, since the presence of water is also possible. Acoustic impedance is given by :- Z = pV ,where p density of the material and V acoustic velocity of wave Acoustic impedance is important in :- the determination of acoustic transmission and reflection at the boundary of two materials having different acoustic impedances. the design of ultrasonic transducers. assessing absorption of sound in a medium. Thus the acoustic impedance of each rock formation in the subsurface will be different due to different densities. This density contrast is helpful in tracking the waves in the subsurface and an acoustic impedance chart is obtained which is known as a seismic chart. However, the impedances recorded by the instruments on the surface is not correct due to noise and other factors that change the impedance factor of the wave. When a seimic wave is reflected off a boundary between two materials with different impedances, some energy is reflected while some continues through the boundary. The amplitude of this wave can be predicted by multiplying the amplitude of the incoming wave by the Seismic Reflection Coefficient, R. ,where Z1 and Z0 are impedances of the two rock formations. Similarly the amplitude of wave travelling through the formation can be determined using the Transmission Coefficient, T. ,where Z1 and Z0 are impedances of the two rock formations. By noting the changes in strength of the wave, we can infer the change in acoustic impedances and thus conclude the change in density and elastic modulus. This change can be used to notify the structural changes in the subsurface and thus predict the formation based upon impedances. It might also happen that when the seismic wave hits the boundary between two surfaces it will be reflected or bent. This is given by Snells Law. The reflection and transmission coefficients are found by applying the appropriate boundary conditions and using Zoeppritz equations. These are a set of equations which determine the partitioning of energy in a wavefield at a boundary across which the properties of rock or the fluid changes. They relate the amplitudes of P-waves and S-waves at each side of the surface. Zoeppritz equations have been useful in deriving workable approximations in Amplitude versus Offset (AVO). These studies attempt with some success to predict the fuid content in the rock formations. The parameters to be used for each seismic survey depends on various variables, including whether the survey is being carried out on land or a marine environment. Other geophysical issues such as sea depth, terrain also play a big role. Safety issues are also important. A Seismic Exploration Survey is broadly divided into three steps :- Seismic Data Acquisition Seismic Data Processing Seismic Data Interpretation Each step in the survey needs high reliability and complicated equipments that can deliver the best results. More often, based on these results, the drilling of exploration wells is based. Since drilling can prove costly, thus capital investment is one of the major concern of every company. The Seismic Exploration Survey can be shown as :- SEISMIC DATA ACQUISITION Seismic data acquisition refers to collection of seismic data. The acquired data is further sent to a computer network where processing of data takes place. With better technologies, the prospect of better acquisition surveys have come into place. A generation and recording of seismic data requires :- Receiver configurations includes geophones of hydrophones in the case of marine acquisition. Transmitter configurations includes laying of transmitter as according to the survey configuration predecided. Orientation of streamers in case of marine surveys. Proper computer network to carry the information from receivers to the programming network. When a survey is conducted, seismic waves generated by dynamite or vibrators travel through the subsurface strata, which are in turn reflected or refracted. These reflected waves and their time to complete one interval is noted by the receivers. The receiver configuration has to be well determined so that maximum data can be collected over an area. ACQUISITION ON LAND In a typical land seismic acquisition process, the survey is planned in an attempt to minimize the terrain constraints. It basically includes the sensor layout scheme and the source development scheme. The source development scheme is used to configure the number of transmitters being used to send the signal down the surface. One or more transmitters can be used based on the programme employed. Similarily one or many receivers can be employed to collect the reflected waves data. The receiver configuration is an important aspect. The configuration can be in such a way that the closest receiver gathers only the high amplitude wave on the first line of receivers or it can be different based on the signal strength and seismic line survey. The data collected through receiver or geophones is converted to binary data that can is further handed over to the computer network for processing. MARINE ACQUISITION Marine acquisition involves processes such as :- Wide-Azimuth Marine Acquisition Azimuth surveys provide a step-change improvement in imaging of seismic data. These surveys provide illumination in complex geology and natural attenuation of some multiples. Azimuth shooting illustrates the acquisition of data in all directions. This acquisition technique can help in generating 3-D models. Coil Shooting this technique acquires marine seismic data while following a circular path by improving upon multi and wide azimuth techniques. This includes vessel steering, streamers and sources in a fashion which delivers greater range of azimuths. Sometime single-sensor recording while steering the vessel in different directions has proved to be more beneficial in case of noise attenuation and signal fidelity. Different seismic surveys can be classified as :- Two-dimensional Survey Three-dimensional Survey Four-dimensional Survey TWO DIMENSIONAL SURVEYS In such a survey seismic data is acquired simultaneously along a group of seismic lines which are differentiated with some gaps, usually 1 km or more. A 2-D survey contains many lines acquired orthogonally to the strike of the geological structures with a minimum number of lines acquired parallel to geological structures to allow line-to-line tying of the seismic data and interpretation and mapping of structures. This technique generates a 2-D cross-section of the deep seabed and is used primarily when initially reconnoitering for the presence of oil and gas reservoirs. THREE DIMENSIONAL SURVEYS Multiple streamers shoot on closely spaced lines. The seismic data gathered on close spacing, the 3-D seismic cube can be formed. This innovation requires use of high performance computers and advanced data processing techniques. The computer generated model can be analyzed in greater detail by viewing the model in vertical and horizontal time slices, or even an inclined section can be viewed. In a standard 3-D seismic survey, the streamers are placed at about 50-150 meters apart, each streamer being 6-8 kilometers long. Airguns are fired every10-20 seconds. However, many other objectives and economical constraints determine the specific acquisition parameters. FOUR DIMENSIONAL SURVEYS The 4-D survey is also called the time-lapse survey. It involves processing of repeated seismic surveys over an area of reservoir under production. The changes occurring in the reservoir due to production and injection can be determined overtime which further helps in field development of the reservoir. One important aspect of a 4-D survey is that there should be minimum difference in the position of the seismic lines when a repeated survey is done after sometime. Significant cost savings can be done by the use of 4-D surveys due to better planning and understanding of reservoir characteristics. DIFFERENT SHOT METHODS The common shot gather uses one transmitter source (vibroseis or explosives) and many receivers (geophones) places at some distance from the source. They geophones are placed at equal spacings from each other. Commom midpoint gather is the most widely used survey technique. It uses one transmitter placed at the midpoint exactly above the formation area to be surveyed. Receivers are set in all the directions surrounding the transmitter. Common offset gather uses multiple shot and receiving technique. Common receiver position gather, as the name states, has only on receiver. While the many shots are employed, the various seismic waves reflecting back to the receiver have different amplitudes and frequencies, thus can be varied and collected differently. COMMON MIDPOINT METHOD It was discovered that relection seismic sections can be improvised by repeated sampling of the subsurface formations using different travel paths of the seismic waves. This can easily be achieved by using commom midpoint method which states that increasing the spacing between source and receiver about a commom midpoint and generating duplicated data of the subsurface coverage. The processing of a common midpoint gather system requires sorting of data from the Commom Shot Gather into a Commom Midpoint Gather. The data collected is usually in the form : In this method, the inclination of the data occurs since the wavefronts reaching out to the receivers are at an inclined angle, this results in much larger raypath than the corresponding receiver placed close to the shot point. In order to use the recordings to a common depth point, one needs to correct the data for all the time travel distances. This is known as Normal Moveout Correction (NMO). After NMO, the summation of various wavepaths gives us a horizontal section at time travel equal to zero. This is known as time stacking procedure. After NMO correction the data is shown as :- SEISMIC DATA PROCESSING A reference seismic processing sequence is applied to input raw gathers to obtain reference seismic output data. A series of test seismic processing sequences are applied to the input raw gathers to obtain test seismic output data. The RMS value of the test seismic output data is normalized to that of the reference seismic output data on a trace by trace basis. The normalized difference between the test and the reference seismic output data is calculated on a sample by sample basis in the time domain and are displayed on color coded plots in the time scale format over the CDP range. Linear regression is performed for each CMP gather to obtain the stack and the zero offset calculated for each time index and the difference is recorded. The normalized differences between the error for the test and the reference sequences are calculated and displayed on color coded plots. The order of sensitivity for each processing step in the reference processing sequence is determined. If necessary, a ny processing step is rejected and the reference processing sequence is revised. 2 WELL-DRIVEN SEISMIC Integrating well data throughout the seismic workflow for superior imaging and inversion   Well-Driven Seismic (WDS) is the integration of borehole information throughout the surface-seismic workflow to provide better seismic images, more reliable stratigraphic interpretation, and greater confidence in global reservoir characterization. Wireline logs (compressional, shear, and density), VSPs, and surface-seismic data represent the elastic response of the earth at various resolution scales. A principle of the Well-Driven Seismic concept is that these data should be processed with respect to their mutual consistency, i.e., that the seismic data must tie with logs and VSPs in time and depth. The aim of the Well-Driven Seismic method is to involve all the available borehole information to optimize the entire seismic workflow to deliver seismic images of superior resolution (in time or depth) and calibrated prestack seismic amplitudes that are suitable for inversion and detailed seismic reservoir description.   Earth properties from logs, VSPs, and surface-seismic data   The Well-Driven Seismic workflow invokes new proprietary software and analysis techniques from WesternGeco and Schlumberger to derive an earth property model from the integrated analysis of wireline logs, VSPs, and surface-seismic data. The property model includes compressional and shear velocities, attenuation (Q) factors, VTI anisotropy parameters, and interbed multiple mechanisms, and is derived at the well location (or locations) and extended across the survey area in 3D. The 3D model is applied in the seismic processing sequence for true amplitude and phase recovery, deconvolution, multiple attenuation, anisotropic prestack time and depth imaging (including of converted-wave data), AVO analysis, and 4D processing.   WELL DATA FOR HIGH RESOLUTION SEISMIC IMAGING Well information can improve many key stages of the conventional seismic processing sequence. VSP data provide excellent discrimination of primary and multiple events, and are used to guide surface-seismic multiple attenuation processes. Furthermore, interbed multiple mechanisms identified in separated VSP wavefields are used as input to data-driven multiple attenuation processes, such as the WesternGeco Interbed Multiple Prediction (IMP). Inverse-Q operators derived from VSP data (and new methods for walkaway VSP data) can significantly improve seismic resolution. WesternGeco employs a proprietary deconvolution process that is constrained by the signal-to-noise level in the seismic data and by the well reflectivity to enhance further the seismic resolution. The calibrated anisotropic velocity model is vital for prestack time and depth migration (including of converted waves) to improve steep-dip imaging, lateral positioning of reflectors, signal-to-noise ratios, and seismic resoluti on.   OPTIMIZED WELL TIES The Well-Driven Seismic method optimizes the processing sequence and the processing parameters within that sequence to tie the seismic data to the wells. Attributes based on the well tie and on the quality of the extracted wavelets are used for deterministic seismic processing decisions. Space-adaptive wavelet processing corrects 3D seismic data to true zero phase between well locations, and stabilizes residual spatial wavelet variations.   BOREHOLE CALIBREATED SEIMIC INVERSION The Well-Driven Seismic approach provides greater sensitivity to seismically derived reservoir attributes through calibrated AVO or acoustic impedance inversion. The well data are particularly important for successful processing of seismic data for inversion. Compensation for the offset-dependent effects of Q, geometric spreading, transmission losses, and anisotropy are essential for processing data over very long offsets (where the strongest AVO expression of the reservoir may be visible). The method calibrates the AVO signatures in the prestack seismic data with the offset-dependent amplitude response synthesized from well logs and/or the response expressed in the walkaway VSP to provide assurance of the seismic processing sequence.   With the seismic processing sequence optimized for resolution and consistency with the well data, Well-Driven Seismic processing is a vital prerequisite for acoustic impedance or AVO inversion and subsequent reservoir characterization. AVO AND INVERSION Amplitude variation with offset (AVO) has been used extensively in hydrocarbon exploration over the past two decades. Traditional AVO analysis involves computation of the AVO intercept, gradient, and higher-order AVO term from a fit of P-wave reflection amplitude to the sine square of the angle of incidence. This fit is based on the approximate P-wave reflection coefficient formulation in intercept-gradient form, given by Bortfeld (1961) and Shuey (1985) among others. Under the assumption of a background PS velocity ratio, the AVO intercept and gradient values can also be combined to obtain additional AVO attributes such as pseudo-S-wave data, Poissons ratio contrast, and others. AVO intercept and pseudo-S-wave data are also used in conjunction with prestack waveform inversion (PSWI) in a hybrid inversion scheme. Hybrid inversion is a combination of prestack and poststack inversion methodologies. Such a combination allows efficient inversion of large data volumes in the absence of we ll information. Amplitude Variation with Offset (AVO) inversion is a prestack technique that is readily applied to seismic gathers but which is still largely under-utilised in the exploration community despite its ability to effectively discriminate between fluid and lithology effects. AVO inversion is equally applicable to both 2D and 3D seismic data in time or depth providing that sufficient care has been taken to preserve amplitudes during processing. A reliable velocity model is also a critical component of the AVO process as accurate angle information is a prerequisite for AVO inversion. The more accurate the angles, the better the partitioning of amplitudes to P-wave and S-wave reflectivities. In addition, both angle and ray path information can be incorporated in a variety of model based amplitude corrections that are preferable and often more accurate than scalars derived from empirical equations. The inversion process is then performed, completing in about the same time as a conventional stack. The resulting outputs are a series of AVO reflectivity sections or volumes that are determined by the Zoeppritz approximation used. Fluid Factor is one of the most useful attributes derived from AVO inversion due its ability to make such distinctions and directly identify hydrocarbons. Multi-Measurement Reservoir Definition workflows include the following components: Reservoir Synthetic Modeling Forward modeling to generate pre-stack synthetics from geological models Anivec (prestack elastic modeling) Prestack Waveform Inversion (PSWI) Full waveform prestack inversion is a non-linear inversion process that estimates elastic model (Vp, Vs, and density) from prestack seismic data using a genetic algorithm. AVO Modeling and analysis AVO Conditioning Conditions angle band stacks prior to performing AVO analysis AVO Inversion Elastic impedance modeling and inversion from angle band cubes Space-adaptive Inversion Space adaptive wavelet processing and inversion to relative seismic impedance Elastic Impedance Inversion Combining low frequency trends with seismic relative inverted impedance cubes to generate absolute impedance Integrated Rock Physics Modeling Fluid and rock property analysis, modeling and substitution Rock Property Calibration Generating rock properties from seismic using transforms derived from petrophysical analysis of well data. The outputs are high-resolution absolute acoustic and shear impedance and density volumes consistent with the seismic data and the well-log data. The inverted elastic parameter volumes are used for detailed interpretation of lithofacies and pore-fluid content in the subsurface. Combined with rock physics modeling and rock property mapping through lithology classification and joint porosity-saturation inversion, the method provides a powerful tool for quantitative reservoir description and characterization. The results are the most-probable litho-class, porosity, and saturation with uncertainties of prediction at every sample point in the 3-D volume. SIGNAL PROCESSING Some elements of the seismic data processing sequence are virtually universal regardless of whether the intention is to perform  time  imaging,  depth  imaging,  multicomponent  imaging, or  reservoir  studies. Data conditioning and signal processing form the foundation of the seismic processing workflow. Signal processing encompasses a wide variety of technologies designed to address numerous challenges in the processing sequence: from data calibration and regularization through to noise attenuation, demultiple, and signal enhancement techniques. It includes Multiple Attenuation Signal Enhancement Data caliberation and regularization Noise Attenuation TIME PROCESSING Prestack time migration (PSTM) may not be the most sophisticated imaging method available, but it remains the most commonly used migration algorithm in use today. Kirchhoff PSTM combines improved structural imaging with amplitude preservation of prestack data in readiness for AVO, inversion, and subsequent reservoir characterization. Advances in this field also mean that time imaging, more than ever before, is an ideal first step in a  Depth Imaging  workflow, reducing the number of velocity model building iterations and decreasing overall turnaround time. It includes Imaging: Regularization, migration and datuming techniques   Statics portfolio   Velocities and moveout Enhanced Migration Amplitude Normalization DEPTH PROCESSING Depth Imaging is the preferred seismic imaging tool for todays most challenging exploration and reservoir-delineation projects. In areas of structural or seismic velocity model complexity, many of the assumptions underpinning traditional time-domain processing are invalid and can produce misleading results. Typical situations might be heavily faulted sequences or salt intrusions. In these cases, only the careful application of 3D prestack depth imaging can be relied on to accurately delineate geological structure, aiding risk assessment and helping operators to improve drilling success rates. TECHNOLOGY   From a technology perspective, high quality depth imaging has two main aspects: the ability to build detailed and accurate velocity models, coupled with a superior imaging algorithm. VELOCITY MODEL BUILDING Velocity Model Building is a key critical element in imaging the Earth. Tomography provides the best high resolution calibrated velocity and anisotropic Earth Models, powerful refraction tomographies detect shallow velocity anomalies. All those algorithms work with any acquisition configuration and can be applied to any geological setting. Also, these computer intensive algorithms are integrated with an interactive graphics environment for rapid and accurate quality control of the interim and final results. VECTOR PROCESSING Conventional seismic recording uses a single scalar measurement of pressure or vertical displacement throughout the 2D or 3D survey to derive images and models of the subsurface. Subsequent processing and inversion steps can be linked to the relative shear-wave contrasts in the subsurface using rock property relationships. However, sometimes it is impossible to meet a surveys seismic imaging or reservoir definition objectives using compressional (P) waves alone. SEISMIC DATA INTERPRETATION Computer aided interpretation is the mainstay of 3D seismic interpretation as the amount of data used is voluminous. The important services are:   IIWS (Intergrated Intelligence Workstation) based interpretation of 2D, 3D data     Structural mapping     Integrating seismic attributes with wireline, core and reservoir data for reservoir characterisation     Seismic modeling   3D visualisation and animation     Palinspastic restoration   Structural restoration is an established method by which to validate seismic interpretations. In addition, palinspastic reconstruction can help identify potential reservoir depocentres, enable the measurement of catchment areas at the time of hydrocarbon migration and lead to an improved understanding of complex hydrocarbon systems such as those in the deepwater. Restoration is achieved by the sequential backstripping of the present day depth model. Upon removal of each successive layer, the remaining surfaces within the model are adjusted to accoun

Tuesday, November 12, 2019

Bertrand Russell disagreed with Berkeleys argument Essay

George Berkeley was an Irish bishop and empiricist. His core philosophy was ‘esse est percipi’ this translates to, to be, is to be perceived. Berkeley believed that both primary and secondary objects were perceiver dependent believed that the world was not was not separate from the mind ergo; he was an immaterialist (we perceive things in the mind). He started his argument for empiricism by stating that in order for things to exist they must be perceived, due to holding this view point he thought that everything depends on the mind. This raises an immediate problem. If everything is perceiver dependent, what happens when an object is not being perceived? Does it simply pop out of existence? This argument does not seem coherent. This is due to the idea being an extremely irrational understanding of the world. The concept can also be disproved. This is because if we could put a video camera into a room and leave it so no one perceived the room and the objects in it and it would not disappear. Berkeley later added to his argument, as an attempt to solve this problem that no object is un-perceived. He claims objects do not disappear out of exist due to there being a constant perceiver, God. This is as God is omnipresent therefore, he always perceives the world. Thus objects do not pop out existence as they are constantly perceived. However by adding the existence of God to his argument it became weak. This is due to a huge assumption. This assumption is that God exists. There are many arguments both for and against God’s existence, such as the teleological argument and the problem of evil. It seems strange to base a theory of object’s existence on a being whose existence is unproven. Bertrand Russell disagreed with Berkeley’s argument for objects existences. Russell argued that if he was sat in his chair and his cat was in one corner of the room and he turned round on his chair and the cat was at the other side of the room, according to Berkeley there was only two possible ways this could have happened. Firstly the cat could have popped out of existence when Russell turned on his chair and then popped back into existence when he had turned back round. Or secondly, the cat could have walked across the room when he was turned on the chair due to God perceiving it. Russell claimed that these two possibilities were irrational and we could not use these two claims for the existence of objects.

Sunday, November 10, 2019

Becoming an adult

My childhood consisted of so many responsibilities, so for me adulthood came at a very young age. Due to a neglectful provider I had to find my own way. Most of my friends were so eager to grow up and get out of their parents house. I on the other hand was looking for a resting place with a nurturing parent. Unfortunately, I ended up in foster care at age seventeen. I became very emotional, but I didn't give up.Adulthood came with many egrets for me, but this sorrow due to loss of childhood had to wait, because responsibilities were â€Å"knocking on the door†. After the hasten process of maturity, I begin to view life from the eyes of what I was, an adult. Grasping the concept made things much easier. I begin learning my way and creating my own path at the same time. So therefore, I graduated high school early got a Job and attended a community college for my Nurse Aide 1 certification. Once I reached 18 1 got an apartment. I then obtained a position In substance abuse workin g as a Certified Nursing Assistant.After two and a half years of work I decided to attend college for Nursing, and It Is very telling getting off a night shift Job attending morning classes, but that Is part of being an adult nothing comes easy It takes hard work and determination. However, people seem to not understand the meaning of being an adult. I feel Like age Is irrelevant when it comes to being an adult due to the simple fact an adolescent can have more sense than a person that's middle aged. I myself have personally encountered this several times in my life.I will admit being an adult comes with a lot f responsibility, and you have to be responsible for your own actions and make decisions. Sometimes I would find myself getting upset, because I didn't have parents there for me and I had to be an adult before it was time for me to be one, but now as I look back I am thankful where I stand in life as a young lady, and I continue to learn and grow every day. The more that life goes on, I realize that I benefited from all the negatives I experienced as a child. I learned to turn all the negative Into a positive to make me a better person as an adult.BY seamiest jesting place with a nurturing parent. Unfortunately, I ended up in foster care at age obtained a position in substance abuse working as a Certified Nursing Assistant. After two and a half years of work I decided to attend college for Nursing, and it is very tiring getting Off night shift Job attending morning classes, but that is part of being an adult nothing comes easy it takes hard work and determination. However, people seem to not understand the meaning of being an adult. I feel like age is negatives I experienced as a child. I learned to turn all the negative into a positive to Becoming an adult As one takes the road to maturity through the phase of adulthood, various influences can be taken from experiences. But, it must be distinguished that most influences come from one’s kind of family or the environment within the family. The stage of adulthood is an important and at the same time, a critical point in a person’s life. Majority of young adults still live with their own families thus, it can be assumed that parents, to be more specific aid in rearing the young adults.From chapter 13 of the book, The Expanded Family Life Cycle Edited by Betty Carter & Monica McGoldrick, viewpoints and principles that might be grasped by some adolescents of both sexes were tackled. As adolescents progress in the long run, these outlooks can either be retained or chucked out. These viewpoints are interconnected in one way or another. Examples of the given values will be provided for further discussion. The list will start with the attempt of the adolescents on learning how to w ork. In a patriarchal society, men are expected to imbibe the concept of work earlier in their lives compared to the women.A male fresh graduate will dive in; head first, to get a good paying job for a sense of accomplishment. Second on the list is self-involvement. In this aspect, an adolescent can engage in activities that will enhance skills, personality and maturity. Enrolling at a dance class or being part of a community work can be some of illustrations of diverting attention to the self, instead of sharing a relationship with somebody. Idealism, another concept in the life of a young adult is probably one of the signs of cheap maturity.Cheap in a sense that idealism brings in the thought that life can be all rainbows and butterflies if taken seriously and carefully. But, in reality, life can knock you down in the most unexpected way possible. An example of this is when the young adult trust the wrong person. After experiencing such event, the adolescent will then find out tha t trust should not be given to everybody without any hesitations. Thus the young adult will then be arriving at the conclusion that the idealism regarding trust doesn’t exist.Another example is when the parents of a young adult underwent divorce. The young adult will now form a concept that when he grows up, he will choose his wife carefully and have a happy married life. Then again, if and when fate takes a bad turn, such idealism will be broken. Aside from the parents or older members of one’s family, a young adult can look up to someone near to him. This is to feed such need of defining the self. Mentors can influence the young adult in a good or bad way, depending on what type of mentor he is.Somebody who is musically inclined can pick a lead singer of a local band as an inspiration. On the other hand, somebody who wants to be popular at school may take in the role of a school jock who keeps on doing vices, seeing that the said jock gains friends and fame through t hose actions. Next is the concept of having a perfect love. Acquiring such notion is linked with the concept of idealism. Yes, the family can provide love and care but the young adult will seek live from a different level, a romantic level that is.In that kind of love, one can share the other side of his or her personality. For an instance, a daughter who is an only child will long for someone that she can take care of because she doesn’t have any siblings to look after. Or, she might seek attention from a guy if she is not given enough time by her parents. The stage of adolescence is also the peak of curiosity. Thus, the inquisitiveness in trying out things comes into the scene. Alcohol and drugs are the common entities that deal with such curiosity.The young adult can either get hooked on those vices when not used in moderation or just use it so to get something sexual experience or enjoy a party. At some point in time, the viewpoint of self-involvement that was introduced earlier will pass and will be replaced by the thought of becoming a householder. From simply enrolling at a dance class, the adult may find the need to give that up if he or she will get married. The adult might choose to save the money for a vacation with his loved one instead for paying for a dance class.A sudden change of priorities will definitely take place due to the notion of becoming a householder in the near future. Also, the concept of having a mentor will change in late adulthood. Thinking that the vocalist of a local band is somewhat inspiring, the adult will come to realize that he or she has her own style of artistry in music. Hence, a realization that the idealism of having an achievement is not based on what the vocalist can do but of what the adult can do. The young adult who perceived the jock as the fame getter will think that excelling in school is a better way of stepping up.As for the curiosity of trying the vices, some â€Å"habits† brought by the vices can change if the young adult will realize that all those are just for cheap thrills and should only be done in moderation if cannot be avoided completely. The differences done by the later phase of adulthood may have a positive or negative feedback from the family of the adult. A positive feedback can be solicited through being grateful of the sense of responsibility and independence while a negative feedback can be caused by the paranoia of the parents that they can no longer watch the young adult’s every move.The transformations can bring about independence but this will not be achieved if and when there is still financial dependence to the parents. A son who is already an adult but is still supported by his parents on his needs at law school cannot fully say that he is already independent. The ego of the son might be affected but he can’t do anything with the set-up yet. The viewpoint of continuity versus innovation can be related to the said example. After finish ing law school, the son has the choice to work in his town or travel elsewhere.The parents, being as protective as they are might hinder him to work in a far place. The decision of the son in leaving can be influenced by the fact that his parents provided his needs when he was still studying. So, he may choose not to work in other towns. If he chose to leave, the concept of family dynamics can be applied given that he has siblings. The attention that the parents used to give him will be diverted to the younger ones. But by the time he comes home for an occasion, attention will be drawn to him again.A different example would be when the eldest daughter got married but her husband died eventually. The daughter decided to move in with her parents since she doesn’t have a child. The room that was now occupied by a younger sibling that used to be owned by the eldest should be vacated since the eldest sister is now staying with them. Lastly, the manifestation of an adult’s p rogress can still affect the relationship of his or her parents. A busy household with two working parents can take for granted one’s relationship with the husband or wife.If their children would leave, they can catch up for the lost times when they are focused on taking care of the children. Otherwise, the flame may have died out many years even before the children grew up. The upbringing of a person done by the parents will be reflected through his achievements, principles or even mistakes. It must be taken into consideration that the link between the stages of adolescence can strike a mirror effect to the adult, the parents or the family as a whole. The effects, be it in the same or a different pole, should be used for one’s improvement and not for a fall down life’s hill.

Friday, November 8, 2019

Cather in the Rye essays

Cather in the Rye essays Without a doubt, J.D. Salinger is one of the best twentieth-century America authors. He is best known for his book, Catcher in the Rye, a book about a seventeen-year-old teenager, struggling through his teenager years, falling into a depression and trying to understand the real world. The straightforward approach to his novel caused a hurricane of controversy in America. It was the first time an author, dared to tell it how it really is and tried to open Americas eyes to understand the thoughts of a typical adolescent teenager. This straightforward, simple read is nonetheless used in many schools today for its rich content of symbolism and truthfulness. This book has had a huge impact on teenagers all over the world.1 The story of J.D. Salingers life begins on January 1, 1919 in New York City. He was born into a wealthy family; his father was a Jewish cheese importer.2 Salinger attended many prep schools. This is where he was first inspired to become a writer. In his quest to become a writer he wrote many short stories, many of which were never published.3 In his later years, Salinger joined the military. He participated in World War II where he became emotionally distraught and sought psychiatric help. Mostly due to the fact that he was half Jewish and witnessed the brutally that Jews were experiencing in Germany. Ironically, he would never write about his involvement in the military or his Jewish descent.4 Upon his return home, he attended college and met his soon to be wife Sylvia. However, the marriage did not last, and after the divorce, Salinger began to seriously write. He began practicing a life of seclusion and Buddhism. He published a few stories during that time period, but his claim to fame did not occur, until after the publication of the Catcher in the Rye.5 After the publication of the Catcher in the Rye, the book drew in a wide range of recognition mostly, because of its time of release. The novel...

Wednesday, November 6, 2019

Operations Decisions for Krafts Foods Inc. and Manute Foods Company

Operations Decisions for Krafts Foods Inc. and Manute Foods Company Companies’ Background The two companies referred to in this study operate in the foods and beverages industry. In addition, the companies concentrate in the production of low calorie microwavable foods.Advertising We will write a custom essay sample on Operations Decisions for Krafts Foods Inc. and Manute Foods Company specifically for you for only $16.05 $11/page Learn More Krafts Foods Inc. is a leading global manufacturer and marketer of beverages and packaged foods (MarketResearch.com, 2011). It has its headquarters in Northfield, Illinois, but also operates in the other continents. Low calorie microwavable products from the company fall under the convenient meals sector. For instance, cheese and Kraft Macaroni come in ready-to-heat pouches. Manute Foods Company is also a multinational foods company. It specializes in the manufacture and distribution of low calorie microwavable foods. Its operations are not as widespread as those of Krafts Foods I nc. However, its presence in the industry is significant. The organization operates from the state of Texas. Low Calories Microwavable Foods Market Structure and Companies Effectiveness Determination Plan Mankiw (2011) regards market structure as the number and types of competing firms operating in a given industry. Consumers across the US and the rest of the world are exhibiting increased preference for healthy and fat-free food products (MarketResearch.com, 2011). According to IMAP (2010), the global demand for convenience foods and increasing health consciousness are expected to facilitate continued growth in the low calorie microwavable foods sector. In addition, majority of the processed foods consumed in the world are packaged. Competition in the low-calories microwavable foods industry is intense. Krafts Foods Inc. competes with other global foods and beverages brands, not only in the low calorie microwavable foods sector. Some of the competitors include Tyson Foods (US), Dan one (France), and JBS (Brazil). Others are Kellog Co. (US), ConAgra Foods (US), and HJ Heinz Co. (US) (IMAP, 2010; Rayburn, 2014; Jambrak, 2012). In spite of the stiff competition, profits in this sector are relatively high. For instance, Krafts Foods Inc. recorded $42.2 billion in revenues in 2008 from its global operations. Operating profits and net income stood at $4.9 billion and $2.9 billion respectively (IMAP, 2010).Advertising Looking for essay on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Krafts Foods Inc. market analysis above reveals that the low calories microwavable foods industry has a monopolistic competition market structure. The market is highly competitive, characterized by numerous operators (Yorke, 1984). The companies in this industry usually compete through the distribution of slightly differentiated products, albeit in the same line. Manute Foods Company exhibits these characteristics in line with the reality in the industry. The two companies analyzed in this paper are operating at the product-market competition level. Analyzing market effectiveness should indicate the two organization’s firm and industry performance in terms of profits. The market effectiveness plan should be based on the entities’ operational strategies. Business strategies should exhibit the ‘forward-looking’ ability of the venture in relation to the choices and investments made. In addition, they should anticipate the future actions of the firm and those of the competitors. Both Manute Foods Company and Krafts Foods Inc. should invest in markets that are characterized by viability and stability, as far as anticipated outcomes are concerned. Viability means that companies can make profits from the markets they are venturing. On the other hand, stability implies that entry into a new market will not lead to losses in the near future. Two Factors Likely to Cause Chang e in the Low Calories Microwavable Foods Monopolistic Competition Market Structure There are various factors that may affect the operations of the two companies. One of them includes regulations in relation to licensing and product quality. Strict licensing terms with regards to these products might lock out some companies. Such a scenario may limit the freedom of entry into the market and exit from this industry. In addition, the terms may reduce the number of firms operating in the industry (Yorke, 1984). Reduced competition will translate to higher profits and market share for the existing companies (Arslan Klaus, 1994). The structure of the market may also be altered by the increasing health consciousness among consumers in the food industry. What this means is that demand for these foods may rise, leading to a rise in the number of new entrants. As a result of this condition, competition in the industry will increase. In light of this, the two companies may be eliminated from the market, in addition to experiencing an erosion of their market share. Short-Run and Long-Run Production and Cost Functions and their Applications the Operations of Manute Foods Company Production is characterized by a number of processes. It involves a series of activities aimed at increasing the value and altering the utility of raw materials or inputs (Mankiw, 2011). Production function determines the relationship between the inputs and the products per unit of time (Collier, Sherell, Babakus Horky, 2014). The inputs may lead to massive costs for organizations if not well managed.Advertising We will write a custom essay sample on Operations Decisions for Krafts Foods Inc. and Manute Foods Company specifically for you for only $16.05 $11/page Learn More The production and cost function for Manute Foods Company can be determined symbolically as follows: Q = f(Xa, Xb, Xc,†¦ Xn). Q represents total quantity of products per specified period. It takes into consideration specific combinations of inputs (Mankiw, 2011). Xn represents the quantity of the different types of inputs. Considering the market conditions, the production levels of Manute Foods Company can be determined or forecast using varying combinations of inputs within specified durations of time. Analysis of costs highlights the relationship between cost and production over a specified period. In essence, the cost function provides different results depending on the firm’s application of varying utilization or inputs percentages (Arslan Klaus, 1994). Businesses experience fluctuations in their long-run production costs. One of the main reasons behind these changes is sustained alterations in production levels over time. Whenever Manute Foods Company incurs losses or makes profits, long-run costs change. In the long term, fixed factors of production are non-existent (Mankiw, 2011).Advertising Looking for essay on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More The short run costs of Manute Foods Company, on the other hand, should accumulate throughout the production process in relation to the production function (Mankiw, 2011). However, it is important to note that fixed costs do not affect short-run costs. The only factors that influence production in the short term include revenues and variable costs, a fact applicable to Manute Foods Company. Short-run and long-run costs and production functions are very essential to managers. As already indicated, the low calorie microwavable foods industry is characterized by monopolistic competition. In the short term, such segments lack efficiency. The inefficiencies result from profit maximization and specified production levels in the industry (Collier et al., 2014). Managers at Manute Foods Company should determine industry market trends in advance. By so doing, they can forecast demand and compute the levels of input necessary to ensure that production meets the demand. The developments highlig hted above have various effects on stakeholders. For example, they may lead to a net loss to both consumer and producer surpluses. The managers of Manute Foods Company can maximize short-term profits from the results of the short-run production and cost functions. When the marginal revenues equal marginal costs from the function, the costs incurred can generate profit for the companies (Mankiw, 2011). Long-term cost and production functions can provide the low calorie microwavable foods managers with information necessary to their operations. For example, they can use the information to plan and implement business strategies. In addition, they can effectively plan for the current and the projected market environments. The information will aid them in making the appropriate production decisions. Efficiency in the long-run costs would also be sustained following the production of the desired quantities of products at the lowest possible costs (Mankiw, 2011). Managers can make other de cisions that affect the status of their organizations from the production and cost functions. For example, they can decide to expand or decrease the size of the companies, change production quantities, and exit or penetrate other markets. Such decisions are based on the results obtained from the production and cost functions. Possible Situations for Discontinuing Operations by the Low Calorie Microwavable Foods Company The two foods company can cease their operations following a legal order faulting their criteria of production. The managers can contest the legal order if they believe their operations do not breach any regulations. Alternatively, the companies can opt to rectify their production systems to adhere to the regulations (Mankiw, 2011). The company can also terminate operations if they do not expect to generate profits or revenues from the industry in the near future. Such a scenario can arise from radical changes in consumption trends, rendering their products obsolete. Pricing Policy for Maximizing Profits in the Low Calorie Microwavable Foods Industry Mankiw (2011) defines psychological pricing as an effective marketing strategy. It involves basing the prices of products on such factors as quality, consumer’s value perceptions, and popular price points (Yorke, 1984). In the low calorie foods market, basing prices on consumer’s health value perception will maximize profits in the long term (Girz, Polivy, Herman Lee, 2012). As already indicated, consumer trends in the foods and beverage industry are changing. To this end, most consumers are adopting more health conscious consumption practices. In light of this, the proposed pricing policy will facilitate the development of positive perceptions among consumers as far as the products of the two companies are concerned. Evaluation of Financial Performance for the Low Calorie Microwavable Products Company A company’s financial performance indicates the financial health of the enti re firm. Evaluations of the performance are carried out from time to time (Mankiw, 2011). Organizations can use their financial performance to compare their position in relation to competitors in the industry. Return on equity would be appropriate in determining the performance of both Krafts Foods Inc. and Manute Foods Company (Girz et al., 2012). The measure would indicate both profits and losses made by the companies, as well as the overall efficiency of the production costs. The return on equity metric has significant impacts on both long-term and short-term managerial decisions. The measure would also incorporate returns for all stakeholders. As a result, the managers have to focus on more than just the profits made by the company. Increasing Profitability and Stakeholders Value in the Low Calorie Microwavable Foods Industry Manute Foods Company and Krafts Inc. should exploit the growing demand for healthy and convenient food products. Conducting research on consumer demands an d developing products to meet identified requirements will enhance return on investments. Effective management of production costs and investment in long-term market targets would improve performance in the monopolistic competitive market (Mankiw, 2011). Positive returns mean increased profits for the companies and value addition to stakeholders. Reference Arslan, G., Klaus, B. (1994). Market structure and profitability in the U.S. food manufacturing industries. Atlantic Economic Journal, 22(1), 103. Collier, J., Sherell, D., Babakus, E., Horky, A. (2014). Understanding the differences of public and private self-service technology. Journal of Services Marketing, 28(1), 2-3. Girz, L., Polivy, J., Herman, P., Lee, H. (2012). The effects of calorie information on food selection and intake. International Journal of Obesity, 36(10), 1340-1345. IMAP. (2010). An IMAP consumer staples report: Food and beverage industry global report2010. Web. Jambrak, A. (2012). Application of high power ultrasound and microwave in food processing: Extraction. Journal of Food Processing Technology, 4(113), 1. Mankiw, G. (2011). Principles of economics (6th ed.). New York: Cengage Learning. MarketResearch.com. (2011). Kraft Foods, Inc.: SWOT analysis. Web. Rayburn, W. (2014). Improving service employee affect: The transformative potential of work design. Journal of Services Marketing, 28(1), 4-5. Yorke, D. (1984). Marketing and non-profit-making organizations. European Journal of Marketing, 18(2), 17-22.

Sunday, November 3, 2019

Security Management Research Paper Example | Topics and Well Written Essays - 4250 words - 1

Security Management - Research Paper Example This evaluation is often referred to as Return on Investment (ROI) in finance. The Return on Investment is calculated by: The concept of Return on Investment is applicable to all investments in an organization. Security sector of an organization is never an exception. The executive decision makers of organizations often have the interest to know the impact of security on the bottom-line operations of the firm. It is imperative to know how much the lack of security in an organization costs the firm before deciding on the amounts of capital to invest on security. The firm thereafter decides on the most cost effective solutions to its security woes. When applied to the security sector of the firm, a Return on Security Investment (ROSI) calculation provides quantitative answers to a firm’s essential financial questions. The Return on Security Investment aids the organization to determine if it spends too much on its security bids. It informs the organization on the financial impact on productivity that the lack of security could cause. Additionally, Return on Security Investment calculation aids the firm’s management to know the extent to which the security investment is enough (Bruce, 2008). Finally, ROSI gives the firm an overview on the benefits of the security product or system. This task looks at security management issues, dissecting aspects of ROSI with reference to Blackberry Company. Blackberry Company is a Canadian wireless equipment and telecommunication company with a reputation of developing Blackberry brands of tablets and hand-held phones. The company was originally known as Research in Motion (RIM). The company’s dominance in the United States market once stood at 43% of the market share. This dominance has precipitously declined in the recent past due to intense competition from Google’s Android and Apple’s iPhone brands. By 2013, the company’s US

Friday, November 1, 2019

Transfer and Studies Essay Example | Topics and Well Written Essays - 750 words

Transfer and Studies - Essay Example I would be grateful to you if you would take my case on humanitarian grounds and take the necessary steps to sanction the transfer to a school at California as soon as possible. The situation that calls for a transfer is as follows. I could pursue my studies at the school in Seattle only till the third semester because I was expecting my child during that period. I finished the third semester while I was expecting the child. My family and the father of my child work and live in California. This made it difficult for me to attend the school, as I had to fly back and forth from southern California and Seattle on weekend all through my third semester. I had to take a year off from school afterward, as I gave birth to my child. As I continue to stay with my family at California, it puts me in a position to resume the pattern of flying back and forth between southern California and Seattle. This may not be an ideal situation for me and my infant. As a first generation American, I need to follow the family values in our culture that demands a situation where the child grows up among both the paternal and maternal relatives. The father of my child works at Southern California, and if I continue my studies at Seattle, it would mean that the family is separated. Moreover, the financial burden will be much heavier for us to handle, since I will have to use the flight more frequently. I am the first in my family to attend law school, and I realize the significance of my studies and am very keen on completing the course. Therefore, I would like to get a transfer to a school in California, where I can pursue my studies diligently, as it would not create any difficulty for me as a mother and a student. I hope you will try to understand my situation and necessitate a transfer as per my request. My grades were affected during the third semester when I had to travel a lot for attending the classes.  Ã‚  Ã‚  Ã‚   I put before you the humble request to consider my case on humanitarian grounds, as the decision to have a child at this stage was unavoidable due to some health reasons. At the same time, I am keen on pursuing my studies in the best way poss ible and look forward to developing a good career in law. I hope you will consider this matter seriously and comprehend the good intention and dedication that prompts me to request a transfer to a school in California.Â